Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack
Picture of 40648 Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack

Aleene’s The Ultimate Multi-Surface Adhesive 1.5 fl. oz. 3 Pack

SKU: 40648
The Ultimate Multi-Surface Adhesive (3-pack) provides exceptional adhesion to indoor and outdoor projects with a UV and waterproof formula that dries clear and fast. This bulk 3 pack of industrial-strength glue is strong enough to use on the toughest of surfaces but safe enough to use with your paper and mixed media projects!

There’s only one glue you need when it comes to strength and versatility: The Ultimate Multi-Surface Adhesive. This industrial-strength glue provides exceptional adhesion to indoor and outdoor projects with a UV and waterproof formula that dries clear and fast. This all-purpose, powerhouse glue is strong enough to use on the toughest of surfaces but safe enough to use with your paper and mixed media projects. Features 3 (1.5 fl. oz.) tubes of The Ultimate Multi-Surface Adhesive.

• Industrial-strength adhesion

• Works on a variety of surfaces

• Indoor and outdoor formula with UV and waterproof protection

  •       Metal
  •       Glass
  •       Plastic
  •       Wood
  •       Fabric
  •       Tile
  •       Stone

Always test for best results.

  1.      Clean, dry and roughen surfaces to be bonded.
  2.      Remove cap counter clockwise from the nozzle.
  3.      Apply a thin coat to each surface.
  4.      Wait approximately 2 minutes before mating surfaces.
  5.      For maximum-strength bond, allow 24 hours for cure time.

Dry time will depend on how much glue was used and the temperature and humidity level in your area. A general dry time estimate for this glue is 7-8 minutes based on testing with a 3-millimeter coating at 70-73 degrees Fahrenheit. Thicker applications will dry at a slower rate.

H4.0 x L 7.0 x W 1.5

You may also like