Aleene's® The Ultimate Multi-Surface Adhesive™
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Aleene's® The Ultimate Multi-Surface Adhesive™
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.
Picture of 33260 Aleene's The Ultimate Multi-Surface Adhesive 1.5 fl. oz.

Aleenes The Ultimate Multi-Surface Adhesive 1.5 fl. oz.

SKU: 33260
The Ultimate Multi-Surface Adhesive (1.5 fl. oz) provides exceptional adhesion to indoor and outdoor projects with a UV and waterproof formula that dries clear and fast. This industrial-strength glue is strong enough to use on the toughest of surfaces but safe enough to use with your paper and mixed media projects!

There’s only one glue you need when it comes to strength and versatility: The Ultimate Multi-Surface Adhesive. This industrial-strength glue provides exceptional adhesion to indoor and outdoor projects with a UV and waterproof formula that dries clear and fast. This all-purpose, powerhouse glue is strong enough to use on the toughest of surfaces but safe enough to use with your paper and mixed media projects. Features 1 (1.5 fl. oz.) tube of The Ultimate Multi-Surface Adhesive.

  • Professional strength
  • Fast drying
  • Dries clear
  • UV proof and waterproof – great for both indoor and outdoor use!
  • Non-foaming

  • Metal
  • Glass
  • Plastic
  • Wood
  • Fabric
  • Tile
  • Stone

Always test for best results.

  1. Clean, dry and roughen surfaces to be bonded.
  2. Remove cap counter clockwise from the nozzle.
  3. Apply a thin coat to each surface.
  4. Wait approximately 2 minutes before mating surfaces.
  5. For maximum-strength bond, allow 24 hours for cure time.

Dry time will depend on how much glue was used and the temperature and humidity level in your area. A general dry time estimate for this glue is 7-8 minutes based on testing with a 3-millimeter coating at 70-73 degrees Fahrenheit. Thicker applications will dry at a slower rate.

H3.5 x L 7.0 x W 1.5

You may also like